139.53664SRT2? I went to open the garage door when it was closed from the pad and the lights blinked and popped so I thought I just blew the bulbs. Well, I replaced the bulbs but nothing happens when I hit the pad to try and make the door go up. I've also hit the 'learn' button but nothing. The unit has power so I'm not sure what is wrong. I unplugged it and then used the learn button again but same result, nothing. Also when I push the light button on the pad, I hear the click for the lights but nothing happens. The same thing happens when I push the open on the pad and I hear the click sound again. This one isn't in the manual so I'm not sure what to do.Ideas?Looking at the manual, I don't see any breakers to reset other than the learn button.I'll try unhooking the door and doing it manually but I doubt that will help. The fact that the lights don't come on either when I hit the light button leads me to believe the board has failed.